Rear Brakes Guide Pins And Protective Caps, Replacing: Installing

-- Grease the guide pin before inserting.

-- Slide the protective cap over the groove on the guide pin.

-- Slide the guide pin -8- with the protective cap -9- through the brake carrier.

Fig 1: Brake Caliper, Servicing Overview

Courtesy of AUDI OF AMERICA, LLC

-- Press the protective cap over the groove on the brake carrier.

-- Insert the brake caliper.

-- Install the bolts -1- and tighten them.

Fig 2: Brake Caliper, Servicing Overview

Courtesy of AUDI OF AMERICA, LLC