Brake System, Bleeding: Notes
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Brake fluid must never come into contact with fluids containing mineral oils (oil, gas, cleaning solutions). Mineral oil damages the sealing plugs and boots of the brake system.
- Brake fluid is poisonous. NEVER siphon brake fluid with your mouth! Also due to its corrosive effect, brake fluid must not come into contact with paintwork.
- Brake fluid is hygroscopic, meaning that it absorbs moisture from the surrounding air, and must therefore be stored in air-tight containers.
- When bleeding, brake fluid that has been flushed through must not be reused and must be disposed of properly.
- Observe disposal regulations, refer to BRAKE FLUID .
NOTE:
Only use new brake fluid conforming to US-Norm FMVSS 116 DOT 4.
Genuine VW/Audi brake fluid conforms to this specification.
Do not use any silicone-based fluid.
Avoid contaminating brake fluid with particles or lint (for example from cleaning cloths).
Rinse off spills, by using plenty of water.
Do not work with compressed air and do not move vehicle while the system is open.
During the final road test, ensure that a ABS-controlled brake test is performed at least once (pulsation must be felt at the brake pedal).
The brake system indicator light blinks when the brake fluid is too low or the ABS system or parking brake is malfunctioning.