Vacuum Pump -V192- Overview

Depending on the engine install, a vacuum pump is installed to support the brake booster.

• Vacuum Pump, Turbo FSI 4-Cylinder, removing and installing, refer to VACUUM PUMP, TURBO FSI 4-CYLINDER .
• Vacuum Pump, FSI V6, removing and installing, refer to VACUUM PUMP, FSI V6, .
• Vacuum Pump, removing and installing, TFSI V6, refer to VACUUM PUMP, V6 TFSI .
• Vacuum Pump, V192, removing and installing, refer to Brake System Vacuum Pump -V192- .
• Vacuum Pump, removing and installing, Audi RS 5, refer to Brake System Vacuum Pump -V192-, RS 5 .

Fig 1: Identifying Vacuum Pump Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 9 Nm
   • Remove to remove the pump.
     NOTE:

     The pump is not designed to be disassembled.

2. Vacuum Pump
3. Vacuum Hose
   • Secure with hose clamps that match those used in production,
4. Bolt
   • 5 Nm
     NOTE:

     Installing the bolt depends on the model.

     Alternatively, secure the vacuum hose with the hose clamp for the vehicle version,

5. O-Ring
   • Replace
     NOTE:

     Installation of the o-ring depends on the model.

6. O-Ring
   • Replace
     NOTE:

     Installation of the o-ring depends on the model.

7. O-Ring
   • Replace
     NOTE:

     Installation of the o-ring depends on the model.