Brakes And Brake Lines Line Routing

WARNING: This page is about a different variant/trim than selected.

Brakes and brake lines are delivered as ready-to-install replacement parts.

Secure brakes and brake lines at original fastening points when installing.

Lines to Hydraulic Assembly

-- Tighten the nuts -1- through -4- to 14 Nm.

-- Tighten the nuts -5- and -6- to 14 Nm.

Fig 1: Connecting Brake Caliper & Piston Circuit Lines

Courtesy of AUDI OF AMERICA, LLC

Brake Hose to Brake Caliper to Front Axle

-- Item -1- brake hose, ensure retaining tabs are seated correctly in bracket.

-- Item -2- retaining spring.

-- -3- brake pipe line, 14 Nm

Fig 2: Identifying Brake Hose, Retaining Spring & Brake Line

Courtesy of AUDI OF AMERICA, LLC

-- -1- brake pipe line, 14 Nm

-- Item -2- retaining spring.

-- Item -3- brake hose, ensure retaining tabs are seated correctly in bracket.

Fig 3: Identifying Brake Line, Retaining Spring & Brake Hose

Courtesy of AUDI OF AMERICA, LLC

Brake Line Routing in Wheel Housing to Front Axle

-- -1- brake pipe line, 14 Nm

-- Item -2- intermediate piece.

-- -3- brake pipe line, 14 Nm

Fig 4: Identifying Brake Line, Intermediate Piece & Brake Pipe Line

Courtesy of AUDI OF AMERICA, LLC

Brake Line Connecting in Wheel Housing to Front Axle

-- Item -1- brake hose bracket.

-- -2- brake line, 14 Nm

Fig 5: Identifying Brake Hose Bracket & Brake Line

Courtesy of AUDI OF AMERICA, LLC

Brake Line Routing to Rear Axle

-- -1- brake hose in brake caliper 20 Nm.

-- -2- brake hose bracket, make sure the tabs are secure inside the bracket.

-- Item -3- retaining spring.

-- -4- brake line, 14 Nm.

Fig 6: Identifying Brake Hose, Brake Hose Bracket, Retaining Spring & Brake Line

Courtesy of AUDI OF AMERICA, LLC