Steering Angle Sensor -G85-: Removing
WARNING: This page is about a different variant/trim than selected.
-- Set the wheels to the straight ahead position.
Coil connector with slip ring -1-.
-- Remove the airbag unit and steering wheel, refer to OVERVIEW - STEERING WHEEL .
- Clipped onto the switch for turn signals, high/low beam headlamps and headlamp flasher.
- Clipped to the coil ring with slip ring.
WARNING:
The coil ring with slip ring must not be turned when they has been removed.
-- Remove the steering column switch module. Refer to STEERING COLUMN SWITCH MODULE, REMOVING AND INSTALLING .