Brake Caliper: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Do not loosen the bolts -1- to remove the brake caliper.
- 4 - Brake Caliper
- Do not hang on brake hose during necessary installation steps, but rather secure to body with wire.
- 10 - BoltsNOTE:
Always replace if removed.
- 196 Nm.
- 11 - Brake Carrier
- Attach to wheel bearing housing.
- Bolted to the brake caliper.
- 190 Nm.
- 13 - Bracket Bolt
- 25 Nm
- 16 - Bracket for Brake Line
- Hook in brake line.