Brake Caliper, Replacing: Installing

WARNING: This page is about a different variant/trim than selected.

NOTE:

Replace Bolts

-- Slide the brake caliper over the brake rotor.

-- Install the bolts -10- and tighten them to 196 Nm.

-- Install brake pads, refer to BRAKE PADS .

-- Bleed brake system, refer to BRAKE SYSTEM, BLEEDING .

-- Mount the wheels, refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

CAUTION:

After inserting brake pads and before driving for the first time, press brake pedal strongly several times while parked so that brake pads are properly seated in their normal operating position.

-- Check brake fluid level, and fill if necessary.

CAUTION:

Make sure the brakes are working correctly before driving the vehicle for the first time.