Front Brake Caliper, Replacing: Removing

Special tools and workshop equipment required 

• Torque Wrench 40-200 Nm V.A.G 1332
• Reversible Ratchet V.A.G. 1332/1
• Torque Wrench 5-50 Nm V.A.G 1331
• Reversible Ratchet V.A.G. 1331/1
• Brake Pedal Actuator V.A.G 1869/2
• Piston Resetting Tool T10145

-- Insert the V.A.G 1869/2 between the brake pedal and driver seat by pressing the brake pedal down at least 60 mm.

Fig 1: Identifying Brake Pedal Depressor VAG 1869/2 Inserted Between Brake Pedal And Driver's Seat

Courtesy of AUDI OF AMERICA, LLC

-- Raise the vehicle.

-- Remove the wheels.

-- Connect the hose from a bleeder bottle to one of the bleeder screws on the front caliper.

-- Open a bleeder screw on the front brake caliper to reduce the pressure from the brake system.

-- Close the bleeder screw.

-- Remove brake pads, refer to BRAKE PADS .

-- Remove brake hose from brake caliper.

-- Remove the brake caliper from the vehicle.

-- Remove the bolts -5- on the brake carrier while holding the carrier securely.

Fig 2: Identifying Brake Caliper Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake carrier.