Front Brake Caliper With Brake Carrier: Installing

WARNING: This page is about a different variant/trim than selected.

NOTE:

Always use new bolts .

-- Carefully press the brake caliper with the brake carrier and the brake pads installed over the brake rotor.

-- Tighten the brake carrier with new bolts -5-.

Fig 1: Identifying Brake Caliper Components

Courtesy of AUDI OF AMERICA, LLC

-- Place the brake hose in the bracket.

-- Mount the wheels.

Wheel bolt tightening specification, refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower the vehicle.