Front Brake Caliper: Installing

WARNING: This page is about a different variant/trim than selected.

NOTE:

Replace the bolts -13-.

Fig 1: Identifying Bolts -13-, Brake Caliper And Brake Rotor, Installation

Courtesy of AUDI OF AMERICA, LLC

-- Carefully press the brake caliper with brake pads installed over the brake rotor.

-- Tighten the brake caliper with the new bolts -13-.

-- Place the brake hose into the bracket.

-- Mount the wheels.

Wheel bolt tightening specification, refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower the vehicle.

CAUTION:

After the first drive, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their normal operating position.

CAUTION:

Make sure the brakes are working correctly before driving the vehicle for the first time.