LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Coupe)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Flange Shaft Mounting Needle Bearing, Driving In Flush In The Output Shaft

Flange Shaft Mounting Needle Bearing, Driving In Flush In The Output Shaft

WARNING: This page is about a different variant/trim than selected.
Fig 1: Driving In Flange Shaft/Pinion Needle Bearing Flush
GWWV35-1521Courtesy of AUDI OF AMERICA, LLC

Install needle bearings with the lettering on the bearing (the side with thicker metal) facing towards 3013.

scientia non olet · About LEMON Manuals