Determine The 4TH Gear Wheel Locking Ring.
WARNING: This page is about a different variant/trim than selected.
- The gear wheel is installed all the way.
NOTE:
The 4th gear wheel locking ring is determined the same as with the synchronizer hub.
-- Determine thickest circlip which can still just be installed and insert it. For the part number.
The following locking rings are available:
| Locking Ring Thickness (mm) | ||
|---|---|---|
| 2.35 | 2.41 | 2.47 |
| 2.38 | 2.44 | 2.50 |