Installed Position: Locking Collar And 3RD/4TH Gear Synchronizer Hub

Fig 1: Installed Position: Locking Collar And 3Rd/4Th Gear Synchronizer Hub

Courtesy of AUDI OF AMERICA, LLC

• The inside collar -arrow A- on the synchronizer hub faces 4th gear.
• The groove -arrow B- on the front of the locking collar -2- must be facing the 4th gear.

-- Slide the locking collar -2- over the synchronizer hub -1-.

Fig 2: Pressing On Synchronizer Hub With Locking Collar For 3rd And 4th Gears

Courtesy of AUDI OF AMERICA, LLC

Fig 3: Identifying 4th Gear Wheel Inner Race / Needle Bearing -A-, Installation

Courtesy of AUDI OF AMERICA, LLC

-- Install the 4th gear wheel, the needle bearing and the synchronizer ring.

-- Install the thrust washer -A-.

Fig 4: Installing Thrust Washer

Courtesy of AUDI OF AMERICA, LLC

-- Install the roller sleeve inner race -B-.

-- Then check all selector gears for ease of movement and axial play.

• Selector gear axial play must be at least 0.15 mm.