LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Coupe)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Input Shaft >> Inserting Spring Into Selector Gear

Inserting Spring Into Selector Gear

WARNING: This page is about a different variant/trim than selected.

The bent end of the spring -arrow- must be hooked into the hole in the selector gear.

Fig 1: Inserting Spring Into Gear
GWWV35-1036Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals