LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Final Drive, Differential - Rear Final Drive 0BF & 0BE (Coupe)) >> Final Drive, Differential >> Specifications >> Fastener Tightening Specifications >> Driveshaft Heat Shield - Tightening Specification

Driveshaft Heat Shield - Tightening Specification

WARNING: This page is about a different variant/trim than selected.

-- Tighten the bolts -arrows- to 24 Nm.

Fig 1: Driveshaft Heat Shield - Tightening Specification
GWWA10-10859Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals