Flange/Driveshaft Seal, Rear Final Drive 0BE: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools and workshop equipment required
- Thrust Pad 16.5/28 mm Dia. VW 431
- Puller T10055
- Adapter T10055/2
- Thrust Piece T10380
- Guide Sleeve T40247/1
- Assembly Tool T40247
- Two Arm Puller Kukko 20/10
- Inductive Heat Unit VAS 6414
- or
- Hotplate
- and
- Digitaly VAS 6519
- Catch Tray
- Sealing Grease G 052 128 A1