Flange Shaft Ring

Special Tools and workshop equipment required 

• Thrust Plate VW 401
• Thrust Plate VW 402
• Thrust Disc VW 412
• Sleeve 40 - 21
• Seal Press Sleeve 2003/1 from the Seal Installer 2003
• Press Tool 3345
• Separating Device 22 to 115 mm, for example Kukko 17/2

Fig 1: Identifying Ring -A- To Flange Shaft, Removal

Courtesy of AUDI OF AMERICA, LLC

B - Separating Tool 22 to 115 mm, for example Kukko 17/2

Fig 2: Carefully Install Ring -A- Onto Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

• Ring installed position -A- : the larger outer circumference on the ring faces the 3345.