Gear Oil In Rear Final Drive 0BF And 0BE, Draining
WARNING: This page is about a different variant/trim than selected.
Special Tools and workshop equipment required
- Catch Tray
Rear Final Drive 0BF
-- Remove the gear oil inspection plug -arrow-.
NOTE:
- Overview of the gear oil plugs, refer to Figure
- Remove the gear oil inspection plug so that the gear oil can flow faster out of the drain hole.
-- Remove the drain plug -arrow- and drain the gear oil.
Rear Final Drive 0BE
-- Remove the gear oil inspection plug -1-.
NOTE:
- Overview of the gear oil plugs, refer to Figure.
- Remove the gear oil inspection plug so that the gear oil can flow faster out of the drain hole.
-- Remove the drain plug -arrow- and drain the gear oil.
Continuation for All Rear Final Drives
-- Install and tighten the new gear oil drain plug -arrow-. Tightening specification, refer to item 16.