ATF In Rear Final Drive 0BF And 0BE, Draining

Special Tools and workshop equipment required 

• Catch Tray

• Overview ATF plugs, refer to Figure and Figure.

Rear Final Drive 0BF 

-- Remove the plug so that the ATF can drain faster -arrow-.

Fig 1: Locating ATF Check Plug

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ATF drain plug -arrow- and drain the ATF.

Fig 2: Locating ATF Drain Plug

Courtesy of AUDI OF AMERICA, LLC

-- Install and tighten the new the ATF drain plug -arrow-. Tightening specification, refer to item  15.

Rear Final Drive 0BE 

Fig 3: Locating ATF Plugs

Courtesy of AUDI OF AMERICA, LLC

-- Remove the ATF inspection plug so that the ATF can drain faster -1-.

-- Remove the ATF drain plug -2- and drain the ATF.

-- Install and tighten the new ATF drain plug -2-. Tightening specification, refer to item  15.

Continuation for All Rear Final Drives 

-- Fill the ATF in the rear final drive. Refer to ATF IN REAR FINAL DRIVE 0BF AND 0BE, FILLING .