LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Brake System (Hydraulic Components - Service Information)) >> Hydraulic Components >> Vacuum System >> Vacuum System, Checking >> Vacuum, Creating With Hand Vacuum Pump

Vacuum, Creating With Hand Vacuum Pump

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

In certain situations, the vacuum can be created using a :VAS6213  instead of using the engine or a vacuum pump.

-- To do so, connect the :VAS6213  to the vacuum hose from the connection -B- to the :VAS6721  .

-- Open the shut-off valve -B-.

-- Create the vacuum using the :VAS6213  until a vacuum between 600 and 950 mbar (8.7 and 13.77 psi) is displayed on the :VAS6721  .

-- Then perform the relevant tests.

scientia non olet · About LEMON Manuals