Vacuum Pump, Removing And Installing, 1.8L/2.0L Engine: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the high pressure pump -2-. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING - CYNB .
-- Remove the bolt -1- for the coolant line and the bolt -2- for the ground cable.
CAUTION:
There is a Risk of damaging the vacuum hoses.
- Carefully remove the vacuum hoses. A damaged vacuum hose must be replaced.
-- Remove and free up the vacuum hoses -2- from the vacuum pump -1-.
-- Remove the bolts -arrows- on the vacuum pump sealing flange.
-- Pull the vacuum pump from the mount and remove.