LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 999 (Brake System (Hydraulic Components - Service Information)) >> Hydraulic Components >> Vacuum System >> Check Valve, Removing And Installing >> Check Valve With Vacuum Hose In Engine Compartment, Removing And Installing, 3.0L TDI Engine >> Installing

Check Valve With Vacuum Hose In Engine Compartment, Removing And Installing, 3.0L TDI Engine: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

NOTE:

Replace the O-rings.

Coating the vacuum hose with water (not with oil) makes it easier to remove.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals