Headlamp Washer System Washer Nozzle, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the washer nozzle telescope -2- all the way out of the bumper cover.
- Hold the telescope in the pulled-out position.
-- Open the side bolsters in direction of -arrows- and remove the washer nozzle -1- from the telescope.
-- Let the telescope go back into the mount slowly.
-- Remove The Cover If The Spray Washer Is Being Replaced. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING and/or ATTACHMENTS, REMOVING AND INSTALLING .