Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Support the engine in the installation position. Refer to ENGINE, SUPPORTING IN INSTALLED POSITION .

-- Remove the front wheels. Refer to the appropriate service information and/or WHEEL, CHANGING AND MOUNTING .

-- Remove the left and right front wheel spoiler. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the nuts -arrows- and the stabilizer bar.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- from the left and right engine mount, lift the engine with the spindle slightly.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Ignore -arrows-

Refer to the appropriate Service Information .