Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Notes
WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Puller - Valve Seal :3364
- Seal Installer - Valve Stem :3365
- Valve Keeper Tool Kit :VAS5161A with Valve Cotter Tool Kit - Punch :VAS5161/3AA , Valve Cotter Tool Kit - Assembly Cartridge :VAS5161/8A , Valve Cotter Tool Kit - Guide Plate 29 :VAS5161/29 and Valve Cotter Tool Kit - Guide Plate 29-1 :VAS5161/29-1
- Valve Keeper Tool Kit - Guide Plate :VAS5161A/29
- Pressure Fork :VAS5161/2
- Threaded Studs :VAS5161/5
- Retainer :VAS5161/6
- Installation Cartridge :VAS5161/8A
- Adapter :VAS5161/11
- Knurled Screws :VAS5161/12
- Valve Insertion Device :VAS5161/18
-- Remove all the glow plugs. Refer to GLOW PLUG, REMOVING AND INSTALLING .