LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 985 (Cylinder Head, VALVETRAIN- CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Cylinder Head, VALVETRAIN >> Timing Chain Cover >> Overview - Timing Chain Cover >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA15-10935Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten the bolts in five steps in the sequence shown.

Step Bolts Tightening Specification/Additional Turn
1. -1, 2, and 3- Install by hand all the way
2. -4 to 7- Install by hand all the way
3. -1 to 7- 8 Nm
4. -1 to 7- 8 Nm - this measurement takes into account the timing chain cover shrinkage.
5. -1 to 7- 90° additional turn
GWWA15-11542Courtesy of AUDI OF AMERICA, LLC
NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten the bolts in five steps in the sequence shown.

Step Bolts Tightening Specification/Additional Turn
1. -1, 2, and 3- Install by hand all the way
2. -4 to 7- Install by hand all the way
3. -1 to 7- 8 Nm
4. -1 to 7- 8 Nm - this measurement takes into account the timing chain cover shrinkage.
5. -1 to 7- 90° additional turn
scientia non olet · About LEMON Manuals