Exhaust Door Control Unit -J883-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following:

NOTE:

Replace The Nuts.

-- Bring the Exhaust Door Control Unit -J883- into the installation position.

The spring -2- must engage the groves -arrows- of the exhaust flap -1-.

Courtesy of AUDI OF AMERICA, LLC