S tronic® Transmission 0CK Transmission Mount
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Tunnel Crossmember
- Removing and installing. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Transmission Support
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Stop
- For the transmission mount
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT[For transmission(s) 0CK] .
- Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .