Automatic Transmission 0BK Transmission Mount
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Tunnel Crossmember
- There are different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Stop
- For the transmission mount
- Transmission Mount
- There are different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Nut
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Transmission Support
- There are different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, DSG TRANSMISSION 0B5/AUTOMATIC TRANSMISSION 0BK .
- Bolt
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .