LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Crankshaft, Cylinder Block- CREC, Cred, CREH) >> Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Overview - Piston And Connecting Rod >> Oil Spray Jet For Piston Cooling

Oil Spray Jet For Piston Cooling

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10106Courtesy of AUDI OF AMERICA, LLC
  1. Insert the bolt with locking compound and tighten to 9 Nm.  Refer to the Parts information for the locking compound.
  2. Oil spray jet with spray nozzle valve (opening pressure 2.0 to 2.4 bar (29 to 34.8 psi))
CAUTION:

The Oil Spray Jets Could Get Damaged.

  • Do not bend the oil injector jets.
  • Bent oil injector jets must be replaced.
scientia non olet · About LEMON Manuals