LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 976 (Crankshaft, Cylinder Block- CREC, Cred, CREH) >> Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Vibration Damper, Removing And Installing >> Installing

Vibration Damper, Removing And Installing: Installing

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Replace The Bolts That Were Tightened With An Additional Turn.

Installation Is Possible In One Position Only.

-- Be careful of the alignment sleeve when installing the vibration damper.

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING, ACCESSORY RIBBED BELT .

scientia non olet · About LEMON Manuals