Guide Frame Bolts Tightening Sequence

WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Guide Frame Bolts Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace The Bolts That Were Tightened With An Additional Turn.

-- Insert The Long Bolts In The Inner Row Of The Guide Frame.

-- Tighten The Bolts In Steps In The Sequence Shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 16-	50 Nm
2.	-1 to 16-	Turn an additional 90°.
3.	-17 to 31-	15 Nm
4.	-17 to 31-	Turn an additional 90°.