Spur Gear Drive, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission Removed. Refer to TRANSMISSION, DISASSEMBLING AND ASSEMBLING [7-SPEED DUAL CLUTCH TRANSMISSION 0CJ, 0CL, 0CK, 0DN, 0DP] and/or TRANSMISSION, REMOVING [7-SPEED DUAL CLUTCH TRANSMISSION 0CK] or TRANSMISSION, REMOVING [8-SPEED AUTOMATIC TRANSMISSION 0BK AWD] .
-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .
-- Remove the hose clamp on the A/C compressor drive dust cap -arrow-.
-- Remove the power take-off drive chain. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
-- Loosen and remove the bolts -1 to 5- in a diagonal sequence.
-- First loosen the spur gear unit from the bonding and then remove it.
-- Remove the oil pump input shaft -arrow-.