Overview - Power Take-Off: Notes

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Power Take-Off

Courtesy of AUDI OF AMERICA, LLC

Spur Gear Unit
- Do not disassemble
- Removing and installing. Refer to SPUR GEAR DRIVE, REMOVING AND INSTALLING .
Bolt
- Tightening Specification And Sequence. Refer to TIGHTENING SEQUENCE AND SPECIFICATIONS .
Shaft Seal
- Always replace. Refer to POWER STEERING PUMP DRIVE SEAL, REPLACING .
Shaft Seal
- Always replace. Refer to A/C COMPRESSOR DRIVE SEAL, REPLACING .
- For A/C compressor drive
Clamp
Protective Dust Cap
- For A/C compressor drive
Input Shaft
- For A/C compressor
- Tightening Specifications. Refer to A/C COMPRESSOR INPUT SHAFT, LOOSENING AND TIGHTENING .
Cover
Input Shaft
- For the oil pump
O-Ring
- Always replace