LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 975 (Crankshaft, Cylinder Block- CEUC, CRDB, CTGE, CWUB, CWUC) >> Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Overview - Piston And Connecting Rod >> Oil Spray Jet For Piston Cooling

Oil Spray Jet For Piston Cooling

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10908Courtesy of AUDI OF AMERICA, LLC
  1. Insert screws with locking compound and tighten to 9 Nm. For locking compound.
  2. Oil spray jet
CAUTION:

The oil spray jets could get damaged.

  • Do not bend the oil injector jets.
  • Check that the oil spray jet is accessible after reinstalling the pins.
  • Bent oil injector jets must be replaced.
scientia non olet · About LEMON Manuals