Tightening Specifications
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
NOTE:
Replace any bolts that were tightened with an additional turn.
-- Tighten bolts in stages as follows:
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-arrow- |
15 Nm diagonally |
| 2. |
-arrow- |
22 Nm diagonally |
| 3. |
-arrow- |
In a diagonal sequence, turn an additional 90° |