BRACKET FOR THE Coolant Recirculation Pump -V50- AND Coolant Shut-Off Valve -N82- / Heater Coolant Shut-Off Valve -N279-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover. Refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Remove the fresh air intake shroud on vehicles with a Coolant Recirculation Pump -V50-. Refer to FRESH AIR INTAKE, REMOVING AND INSTALLING .
-- Disconnect the connector.
-- Remove the bolts -3- and remove the coolant shut-off valve -2-.
-- Remove the bracket -4- from the clip nuts -6-.
-- Remove the bolts -5- and remove the Coolant Recirculation Pump -V50- -1-.