LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Coolant Circuit >> BRACKET FOR THE Coolant Recirculation Pump -V50- AND Coolant Shut-Off Valve -N82- / Heater Coolant Shut-Off Valve -N279-, REMOVING AND INSTALLING >> Installing

BRACKET FOR THE Coolant Recirculation Pump -V50- AND Coolant Shut-Off Valve -N82- / Heater Coolant Shut-Off Valve -N279-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following: 

-- Tighten the bolts -3- to 8 Nm and the screws -5- to 1.5 Nm.

-- The bracket must be completely pressed into the clip nuts.

-- Install the fresh air intake shroud for vehicles with the Coolant Recirculation Pump :V50  . Refer to FRESH AIR INTAKE, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals