Overview - Air Routing And Air Distribution

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Air Routing And Air Distribution Exploded View

Courtesy of AUDI OF AMERICA, LLC

Inlet Air Duct for the Traction Battery
- If the retainer no longer holds or a tab breaks, the air guide may also be secured to the battery cooling module and to the air guides using a bolt.
- Removing and Installing. Refer to Traction Battery -A2- INLET AIR GUIDE, REMOVING AND INSTALLING .
Front Outlet Air Guide for the Traction Battery
- If the retainer no longer holds or a tab breaks, the air guide may also be secured to the battery cooling module using a bolt.
- Removing and Installing. Refer to Traction Battery -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING .
Left Air Guide
- Use an additional bolt to attach the air guide if the retainers no long hold. Remove the traction battery to do this. .
- Removing and Installing. Refer to LEFT AND RIGHT AIR GUIDES ON Traction Battery -A2-, REMOVING AND INSTALLING .
Bolt
- 2 Nm
- Quantity: 2
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold. Remove the traction battery to do this. .
Traction Battery -A2-
- Work on the Traction Battery -A2- is the same as for removing and installing it in the sense that the vehicle must be turned off and disabled, etc. .
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold.
Bolt
- 2 Nm
- Quantity: 2
Right Air Guide
- Use an additional bolt to attach the air guide if the retainers no long hold. Remove the traction battery to do this. .
- Removing and Installing. Refer to LEFT AND RIGHT AIR GUIDES ON Traction Battery -A2-, REMOVING AND INSTALLING .
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold.
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold.
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold.
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold.
Battery Cooling Module
Bolt
- Use an additional bolt to attach the air guide if the retainers no longer hold.
Rear Outlet Air Guide for the Traction Battery
- Use several bolts to attach the air guide to the battery cooling module if one of the tabs breaks off.
- Removing and Installing. Refer to Traction Battery -A2- REAR OUTLET AIR GUIDE, REMOVING AND INSTALLING .