Battery Fan 1 -V457-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition.
-- Remove the luggage compartment floor covering. Refer to LUGGAGE COMPARTMENT TRIM PANELS .
-- Bring the battery cooling module in the service position. Refer to BATTERY COOLING MODULE, BRINGING INTO SERVICE POSITION .
-- Turn the rubber grommet -1- on the connector upright and disconnect the connector.
-- Remove the bolts -arrows-, and remove the Battery Fan 1 -V457-.