Traction Battery -A2- INLET AIR GUIDE, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation is carried out in the reverse order while observing the following.
NOTE:
If the tabs are broken -1 and 5-, the air guide -4- may also be secured to the battery cooling module -2- and to the air guide -6- with bolts -3-.
-- Press the air guide onto the battery cooling module and on the air guide on the traction battery until it audibly engages.
-- Reinstall all of the previously removed components.
-- Turn on the ignition.
-- Check the A/C system Diagnostic Trouble Code (DTC) memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary. Refer to Vehicle Diagnostic Tester in the "Guided Fault Finding" function.