LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 974 (Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Battery Cooling Module >> Air Distribution Channels, Removing And Installing >> Traction Battery -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING >> Removing

Traction Battery -A2- FRONT OUTLET AIR GUIDE, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition.

-- Remove the luggage compartment floor covering. Refer to LUGGAGE COMPARTMENT TRIM PANELS .

GWWA87-11303Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness -1- -arrows-.

-- Remove the bolts -2, 4 and 6-, if applicable.

GWWA87-11283Courtesy of AUDI OF AMERICA, LLC

-- Open the retaining tabs -1- on the left and right side and remove the front outlet air guide -3- from the battery cooling module.

-- Carefully unclip the front outlet air guide -7- from the retainers -arrows- on the air guide -5- and remove it.

-- Remove the front outlet air guide.