Left/Right Rear FOOTWELL Vent Temperature Sensor -G637- / -G638-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the respective front seat into the forward most and highest position.
-- Unclip the front cover -1- with the Trim Removal Wedge :3409 and remove the cover in direction of -arrow- from the coupling station -2-.
-- Carefully lift up the carpet on the inside of the coupling station.
-- Turn the vent temperature sensor -1- counterclockwise under the lifted carpet and remove it from the mount.
-- Disconnect the connector -2-.
NOTE:
If the connectors are preventing access to the vent temperature sensor, disconnect the connectors from the front seat while observing the safety precautions. .