Air Ionization System Control Module -J897-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Market-specific only in the "Comfort" version.

-- Place the right front seat as far forward as possible.

-- Remove the right B-pillar air duct. Refer to B-PILLAR AIR GUIDE, REMOVING AND INSTALLING .

-- Turn the ionizer -3- counterclockwise -arrow A- and remove it from the mount.

-- Free up the wiring harness -2-.

-- Remove the adhesive strips, if equipped.

-- Open the tabs -1- -arrow B- and remove the air ionization system control module -4- downward from the mount -arrow C-.