Auxiliary Components Bracket, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER .
-- Disconnect and free up the connector -1- for the Charge Air Pressure Sensor -G31-.
-- Loosen the hose clamps -arrows- and remove the air duct hose.
Refer to appropriate service information. .