LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 971 (Turbocharger System (Service Information - CEUC, CTGE)) >> Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Removing >> Audi RS6/RS7

Audi RS6/RS7

WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
GWWA21-10728Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connectors -2-.

-- Remove the bolts -arrows- and then free up the Turbocharger Recirculation Valve -N249- with the air guide.

NOTE:

Ignore -1 and 3-.

-- Remove the bolts -arrows-, and remove the Charge Air Pressure Sensor -G31- -1-.

GWWA21-10834Courtesy of AUDI OF AMERICA, LLC