Charge Air Cooler, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi S6, 2017 Audi S6, and 2016 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clamps - Up To 25 mm :3094
- Hose Clip Pliers :VAS6362
- Engine Support Bridge - Spindle :10-222A/11
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Seal - Charge Air Cooler to Charge Air Cooler Housing