Special Tools
WARNING: This page is about a different car, the 2018 Audi A6 Quattro, 2017 Audi A6 Quattro, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Used Oil Collection and Extraction Unit :SMN372500
- Counterhold - Multiple Use :T10172A
with Counterhold - Kit - Adapter 5 :T10172/5
- Gearbox Support :T40206
with Gearbox Support 1 :T40206/1
- Plate :T40285
- Clutch Module Puller :T40301
- Clutch Module Centering Device :T40302
- Thrust Piece :T40303
- Supercharger Module Support :T40304
- Cooling System Tester - Adapter :VAG1274/8
- Cooling System Tester :VAG1274B
- Turbo System Tester Kit : VAG1687
Turbo System Tester Kit Adapter 4 : VAG1687/4
, Turbo System Tester Kit - Adapter 10 :VAG1687/10
, Turbo System Tester Kit - Adapter 13-1 :VAG1687/13-1
and Turbo System Tester Kit - Adapter 13-2 :VAG1687/13-2
- Engine and Gearbox Bracket VAS6095A :VAS6095A
- Engine Bung Set :VAS6122
- Shop Crane - Drip Tray :VAS6208
- Hose Clip Pliers :VAS6362
- Bearing/Bushing Installer - Multiple Use :VW295
- Slide Hammer Set :VW771
with Slide Hammer Set - Threaded Piece :VW771/15
- -1- Puller - Kukko Internal - 18.5-23.5mm :21/3
- Arbor :2033
- Seal Installer - Valve Stem Seal Tool :2036
- Hose Clamps - Up To 25mm :3094
- Bearing Installer - Wheel Bearing :3144
- Camber Adjustment Tool :VAG1942
- Test Adapter For Compressor Module :VAS6909A