LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 967 (Engine Cooling System (Service Information - CYNB - 1 Of 2)) >> 19 Cooling System >> Radiator/Coolant Fan >> Fan Shroud, Removing And Installing >> Installing

Fan Shroud, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

-- Install The Lock Carrier Cover And The Front Bumper Cover End Plate. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Connect the coolant hose to the coupling. Refer to Figure.

NOTE:

Do Not Reuse Used Coolant.

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals