LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 967 (Engine Cooling System (Service Information - CYNB - 1 Of 2)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> SUBFRAME Coolant Pipe, Removing And Installing >> Installing

SUBFRAME Coolant Pipe, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

Do not reuse used coolant.

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals